$3,111.00 $3,549.99 You Save 12% ($438.99)
Ensure that your wine collection is preserved and aged in perfect cellar conditions using the Breezaire 1,000 Cu. Ft. Split System Cellar Cooling Unit (WKSL4000). This split system unit is comprised of a fan & coil unit and a separate condenser unit that can be placed up to 50 ft. away.
Sentry III Thermostat: This cellar cooling system uses the Sentry III system to ensure that up to 1,000 cu. ft. is kept at a specified temperature between 48°F to 63°F and 50 to 75% relative humidity
System Precautions: With power outage protection and blocked airflow protection, you can be sure that your collection will be kept stable despite unforeseen mishaps
LED Display: An easy-to-read LED display allows you to set and monitor the temperature you wish the system to cool your cellar to
When our self-contained series will not meet your needs then the WKSL split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems. The WKSL Series cooling systems are special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. The systems are designed to, when installed in a properly constructed enclosure provide a constant selectable temperature between 48° and 63° F while maintaining 50 to 75% relative humidity.
WKSL Series systems are designed for easy installation by any, properly equipped and qualified air conditioning or refrigeration service technician. Two copper tubes and low voltage wiring connect the two modules and power is hard wired to the units using adequately sized 110 AC volt electrical sources. These systems must be charged with refrigerant during installation. The WKSL series uses the Sentry III+ digital control system for complete control of the enclosure conditions.
Model Volume (max). Electrical Dimensions Weight
Fan/Coil 265 cu.ft. 1 Amp 14.25W x14.125H x7.75D 25 lb.
Condenser 265 cu.ft. 4 Amps 14.25W x14.125H x11.00D 35 lb.
Fan/Coil 1000 cu.ft. 1.5 Amps 14.25W x19.75H x12.375D 45 lb.
Condenser 1000 cu.ft. 7.5 Amps 14.25W x19.75H x12.375D 55 lb.
*WKSL 2200 & WKSL 4000 models are is available in a 220v - 50 hz (Model WKSL 2150 & WKSL 3350)
Limited Warranty for all BREEZAIRE self contained units (USA only). BREEZAIRE Products Company warrants this product to be free from defects in material and workmanship and agrees to repair or replace any part of the enclosed unit which proves defective under these terms and conditions.
Alteration, repair or attempted repair of the unit by anyone other than BREEZAIRE will void this warranty.
Who is protected: This warranty may be enforced only by the original retail customer and is not transferable.
Length of Warranty:
All parts used in this unit are warranted for Five years (60 months) from the original retail purchase.
Factory labor is provided at no cost for one year (12 months) from the original retail purchase.
What is not covered: Any unit on which the serial number cannot be verified. Damage, deterioration or malfunction resulting from, but not limited to:
Any shipment of the unit (claims for shipping damage must be presented to the shipper). Installation or removal of the unit. Installation in an enclosure of inadequate design that does not follow the minimum guide lines of the installation instructions. Inadequate ventilation for supplying and exhausting condenser air that does not follow the minimum guide lines of the installation instructions. Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature, improper storage, unauthorized modification, electrical power surges or failure to follow instructions supplied with the unit. Exposure to corrosive environments such as, but not limited to, marine air, caustic pool chemicals, cleaning solvents, gasoline and petroleum products. Burial or coverage by, but not limited to, dirt, snow, mud, storage shelves, fabric products or vegetation. Any cause which does not relate to product defect.
What BREEZAIRE will pay for:During the first 12 months BREEZAIRE will pay for labor and material to repair the unit at our factory. Additionally, BREEZAIRE will pay the cost of shipping the unit to and from our factory. During the 13th to 60th months BREEZAIRE will pay for the material to repair the unit at our factory.
What BREEZAIRE will NOT pay for: Installation or removal of the unit. Handling or packaging of the unit. Repairs performed by anyone other than BREEZAIRE. Any other damages, whether incidental, consequential or otherwise.
How to obtain warranty service: BREEZAIRE may require you to provide the original bill of sale or receipt as proof of purchase in order to obtain warranty service. Please retain any such proof of purchase. If a problem is suspected with a BREEZAIRE cooling unit, please contact your dealer. Do not return a unit without authorization from BREEZAIRE. Should it be necessary to return your unit for warranty service, it must be packaged in the original packaging or similar packaging providing an equal degree of protection. Any freight charges must be prepaid, BREEZAIRE will not accept collect shipments. If the unit is found to be defective BREEZAIRE will reimburse (during the first 12 months) the cost of shipping the unit at standard second day freight rates.
LIMITATION OF IMPLIED WARRANTY: BREEZAIRE'S SOLE LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO, AT OUR OPTION, THE REPAIR OR REPLACEMENT OF THE UNIT. BREEZAIRE SHALL NOT BE LIABLE FOR: DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE UNIT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE UNIT, LOSS OF TIME OR COMMERCIAL LOSS. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
While great effort has been made to provide accurate guidelines, BREEZAIRE cannot warrant its units to properly cool a particular enclosure. Customers are cautioned that enclosure construction, unit location and many other factors can affect the operation and performance of the unit. Therefore the suitability of the unit for a specific enclosure or application must be determined by the customer and cannot be warranted by BREEZAIRE.